Teknoware TAPSA CONTROL TKT65, Installation And Maintenance Instructions Manual

Page: 16 / 53

VOT 34; Rev 1.81; EN; 11.12.2019
TKT65C
– Installation and maintenance
16
The default setting is 0 (zero).
NOTE: This function only works in addressable
monitoring. If circuit monitoring is chosen, the
central battery unit needs to be reconfigured
after changing the circuit load.
3. Press the SET button until the
value you wish to select is shown
in the display.
The automatic configuration settings
are changed.
5 TEST SELECT
Use this setting to choose between automatic
and manual tests.
7-segments-
display
The first section in the 7-segment-display
determines every how often the luminaire test is
made, from 1 to 7, meaning the number of
days. If the number is 1, the test is made every
day, or if it is 7, the test is done once a week.
The number of the second segment determines
the settings of the luminaire tests:
0 = Luminaire and battery test, both manually.
1 = Luminaire and battery test, both
automatically (default value).
2 = Luminaire test automatically, battery test
manually.
3 = Luminaire test manually, battery test
automatically.
The automatic luminaire test is made once per
day on the chosen time of the day.
The automatic battery test is made twice a year
(4
th
of January and 4
th
of July).
1 2
To choose between automatic and
manual tests,
1. Go to the menu with the
MENU / OK button.
2. Press the BROWSE button until
the TEST SELECT led is lit.
3. Press the SET button until the
value you wish to select shows in
the display.
The testing settings have been
changed.