Tekno RC ET48.3, Building Instructions

Page: 20 / 28

TKR5060
TKR5065
Steering servo (not included)
TKR1525
ESC (not included)
double sided tape
TKR5065
TKR5125
Note: Install ESC tray on the
mudguard (do not overtighten).
Note: CA glue 3 black o-rings (TKR5125) to the bottom legs of the ESC tray.
TKR1401
TKR1322
TKR1525 TKR1525
TKR5065
TKR5065
TKR5065
TKR1401
TKR1322
TKR1322
TKR1401
RX (not included)
Transponder (not included)
TKR1401
M3x6mm Button Head Screw
x6
TKR1322
M3x8mm Flat Head Screw
x5
TKR1525
M3x14mm Cap Head Screw
x6
TKR5125
O-ring 3x7mm
x3
TKR1221
M3X8mm Washer
x4
TKR1221
TKR1221
Note: Feed the servo wire underneath the esc tray
in between the mounting screws on the mud guard,
then feed both ESC and servo wires into the RX
box as shown. Install wire retainers (TKR5065)
to secure them properly.
CA
glue
Step
O-4
Step
O-3
Step
O-1
Step
O-2
Bag O
Final Assembly
20
*TKR5060C
(Option)
Note: we recommend
using a servo with at
least 300 oz/in torque.