Tekno RC ET48.3, Building Instructions

Page: 9 / 28

TKR5472
TKR5073
TKR5070
TKR5073
TKR5034
TKR1601
TKR1201
TKR1201
TKR5165
Grease
Step
G-1
Step
G-2
Changes to the wheelbase have a dramatic effect on handling,
since it shifts the disribution of weight over the rear wheels.
This adjusts traction. By shortening the wheelbase at the rear, you
are placing more weight over the rear wheels.
Changes to the wheelbase also change the amount of sweep the
rear driveshaft will have. More driveshaft sweep creates an effect
similar to anti-squat, where the rear end gets pushed upwards on
throttle. This helps reduce chassis slap when landing jumps on throttle.
(FRONT)
(REAR)
Bag G
Rear Hub/CVA Assembly
9
Thread
Lock
Note: Notch on pin
needs to line up
with set screw.
TKR5199
TKRBB13194
TKRBB08165
TKR5071
(Option)
*TKR5071B
*TKR5071C
*TKR5071X
(Option)
*TKR5199A
TKR1603
TKR5073
CV Joint Pin
x2
TKR1201
M3 Locknut Black
x4
TKR1603
M5x4mm Set Screw
x2
TKRBB13194
Ball Bearing (13x19x4)
x2
TKRBB08165
Ball Bearing (8x16x5)
x2
TKR5071
M3x16.8mm Pin
x2
TKR1601
M3x4mm Set Screw
x4