Tekno RC ET48.3, Building Instructions

Page: 14 / 28

TKR1323
TKRBB050825
TKRBB050825
Note: Apply
a small drop
of oil for
easy o-ring
installation.
Note: Tighten nut all the way down,
then back it off 3 full turns
Stock Position
(is REAR hole)
TKR5100
TKR5056
TKR5123
TKR5052A
TKR5104
TKR5101X
TKR5231
TKR1201
TKRBB06103
TKRBB06103
TKR1529
Note: Stock bumpsteer setting is 4
washers over the steering ball link.
4 x TKR1221
TKR1221
TKRBB06103
TKRBB050825
TKR5104
TKR5122
TKR5104
TKR1529
TKR1221
TKR5103
TKR5103
TKR1201
TKRBB06103
TKR5052A
TKR1323
M3x10mm Flat Head Screw
x2
TKR1201
M3 Lock Nut Black
x2
O-ring 16x12x2
TKR5231
x1
TKRBB06103
Ball Bearing (6x10x3)
x4
TKRBB050825
Ball Bearing (5x8x2.5)
x4
TKR1529
M3x20mm Cap Head Screw
x2
TKR5052A
Pivot Ball M3x6.8mm
x4
TKR1221
M3x8mm Washer
x8
TKR5052A
TKR5052A
TKR5052A
Thread
Lock
Thread
Lock
Thread
Lock
Right
Left
Step
J-1
Step
J-2
Step
J-3
Step
J-4
Bag J
Steering Assembly
(overview)
14
77.70
Note: Notch always goes on
the left side of the vehicle