background image

Mounting instruction for
F1 Competition 09 Chassis 
Item N°. 10007, 10008

A.10007-10008-200409

FG Modellsport GmbH
Spanningerstr. 2
73650 Winterbach-Germany
Phone: +49 7181 9677-0
Fax: +49 7181 9677-20
[email protected]
www.fg-modellsport.de

Please thoroughly keep this construction manual for spare parts orders!

Weight of the individual bags/ boxes:
Bag A

=

4 parts

Bag B

=

0,871 kg 

Bag C

=

0,649 kg

Bag D

=

0,617 kg

Bag E

=

0,308 kg

Bag F

=

0,136 kg 

Bag G

=

0,699 kg 

Bag H

=

0,729 kg

Bag I

=

0,091 kg

Bag J

=

0,125 kg 

Bag K

=

0,498 kg 

Bag L

=

0,442 kg 

Bag M

=

0,502 kg

Bag N

=

0,355 kg 

Bag O

=

0,587 kg, only for Item N°. 10007

Bag P

=

0,447 kg, only for Item N°. 10008

The RCS, accumulators and battery charger are not included in the de-
livery volume. 

We congratulate you on buying this FG Competition model. Please check
the contents of the construction set, respectively of the bags. The indi-
vidual bags had been thoroughly packed by us and their weight had been
checked. When purchasing the individual bags, please check their weight
and their closure by staples which must not have been removed or ope-
ned and closed several times. It is possible that the weight of an indivi-
dual bag deviates by 5 grams. In case of claims due to missing parts, you
always need to present the label indicating the weight at your speciali-
zed dealer. By checking the weight of the bag, you may exclude that lar-
ger parts or several parts are missing.

Summary of Contents for 10007





























Reviews: