6
Connecting your Internet TV Set-Top Box
75 Ohm Cable TV Antenna:
if your TV only has a 75-Ohm coaxial connector, you may purchase
an adapter from an electronics store (e.g., Radio Shack 15-1269C) to make the following video
connection through the Video of your Internet TV Set-Top Box (item 4 in the rear panel
illustration) with the supplied Video cable, as illustrated below. An audio signal will not be
received with this setup.
Power Adapter Connection
Connect the supplied Power Adapter to the unit Power input jack (item 7.) Plug the Power
Adapter into a power strip (surge protector) connected to a wall socket. This will turn the unit on.
Put it in stand-by mode by pressing the Power key on the remote.
Printer Connection (optional)
If you have one of the printers supported by the Internet TV Set-Top Box, connect it to the Printer
port (item 1.) For the complete list of supported printers, please refer to the “Reference: Set-Up
”
section of this manual.
Cable
Antenna
Video Adapter
Internet TV Set-Top Box
rear panel
AUDIO
LEFT RIGHT VIDEO S-VIDEO
Television
rear panel
Video Cable
Y
Y