EM00136064 rev. 2.1
9
Paragraph 10 – Level Alarm
Programming Operation
-
-
Alarm Level
Alarm Flow
Alarms
Level Stop
Alarms
Level Alarm
Stop
Alarm
PROG
-
-
-
ESC
This makes it possible to set the pump when the level
sensor alarm is activated. In other words you can decide
whether to stop dosage (Stop) or simply activate the alarm
signal without stopping dosage.
Changes can be made by pressing the
key, then using
the
keys to set the alarm type. Confirm by pressing
the
key. Press
to return to the main menu
Paragraph 11 – Flow Display Unit
Programming Operation
-
-
Unit
Unit
Unit
Standard
Standard <-
L/h
PROG
-
-
+
-
measurement on the display.
Changes can be made by pressing the
key, then using
the
keys to set the unit of measurement, choosing
between L/h (litres/hour), Gph (Gallons/hour), ml/m
(millilitres/minute) or standard (% or frequency, depending
on settings). Press
to confirm and return to the main
menu
Paragraph 12 – Setting the Pause
Programming Operation
-
-
Paus
N.Aperto
PROG
+
-
Configurazione
+
The pump can be paused by remote input.
The factory setting is Normally Open.
Changes can be made by pressing the
key, then
using the
keys to set the new value ( N. OPEN or
N. CLOSED).
Press
to confirm and return to the main menu.
Display contrast adjustment.
For adjusting the display contrast keep the key
pressed and within 5 seconds press the keys
or
to
increase or decrease the contrast.
Alarms
Display Cause
Interruption
Fixed alarm LED
Flashing word “Lev”
I.e.
Man
Lev P100%
End of level alarm, without
interrupting pump operation
Restore the liquid level.
Fixed alarm LED
Flashing words “Lev” and “stop”
I.e.
Man
Lev Stop P100%
End of level alarm, with interruption
to pump operation
Restore the liquid level.
Fixed alarm LED
Flashing word “Flw”
I.e.
Man
F
Flw P100%
Active flow alarm. The pump has
not received the programmed
number of signals from the flow
sensor.
Press the
key
I.e.
Parameter Error
PROG to default
Internal CPU communication error.
Press the
key to restore the
default parameters.
