EM00136064 rev. 2.1
4
Paragraph 2 – Timed Weekly Dosage
Clock
Wed 08:00
PROG01 MTWTFSS
00.00 _______
+
-
Pump Funtions
Configuration
Pump
Functions
Weekly Timer
Weekly Timer
PROG
-
+
-
PROG01 MTWTFSS
PROG01 hh.mm
PROG01
PROG01
PROG01
PROG01
Weekly _______
Time 00.00
Q.ty 0ml
Dos.Time 0 s
Rel.Off
Rel.Off
-
-
-
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
ESC
-
1)
6)
2)
3)
4)
5)
It is possible to programme 10 dosages for the whole week. Press
in the “weekly timer” mode in order to
programme the dosages.
1) The programme number can be modified using the
keys and confirmed by pressing the
key.
2) The dosage time can be modified using the
keys and confirmed by pressing the
key.
3) The dosage quantity can be set in “ml” using the
keys and confirmed by pressing the
key
4) The dosage time, that is to say the time (in seconds) during which you wish to dose the set quantity, can be set
in “cc” using the
keys and confirmed by pressing the
key
5) The values of the relay connected to dosage can be modified using the
keys and confirmed by
pressing the
key; in “Off” mode, the relay is not switched off (open), and in “after” mode the relay closes when
dosage is activated and remains closed once dosage is completed for the time (in seconds) set using the
keys and then confirmed by pressing the
key. In “before” mode, the relay closes before the dosage activation
time, for the time (in seconds) set using the
keys and then confirmed by pressing the
key.
6) Day activation, or rather the days on which you want the set programme to be active (start time, quantity,
dosage duration and relay operating mode). Press the
key to make changes, then press the
key to
activate/deactivate dosage and the
key to change the day of the week. Press
to confirm and move
automatically to the next programme.
Repeat the whole procedure if you need to programme the new programme, or press
to return to the main
menu.
The next step in the main menu is programming the clock. This can be done by pressing the
to make
changes, using the
to set the required values and then confirming by pressing the
key. You can set
the day, hour and minutes in sequence. Obviously, the set time and day are those that the programming will refer
to.
