EM00136064 rev. 2.1
8
Paragraph 7 - Statistics
Programming Operation
-
-
-
-
-
-
Statistic
Statistic
Statistic
Statistic Reset
Hours 10
Hours 10
Strokes 1000
NO
PROG
+
-
Statistic
Statistic
Statistic
Q.ty(L) 100
Power 10
Reset
ESC
The main menu displays the pump operation times. By
pressing the
key you can access other statistics:
- Strokes = number of strokes made by the pump
- Q.ty (L) = quantity dosed by the pump in litres; this figure is
calculated on the basis of the memorised cc/stroke value
- Power = number of pump starts
- Reset = use the
to reset the counters (YES) or
otherwise (NO), then confirm by pressing the
key.
Pressing the
key will take you back to the main menu.
Paragraph 8 – Password
Programming Operation
-
-
-
Password
Password
****
0000
PROG
+
-
By entering the password, you can enter the programming
menu and see all the set values. The password will be
requested whenever you seek to modify them.
The flashing line indicates the number than can be modified.
Use the
key to select the number (from 1 to 9), and the
key to select the number to be modified. Confirm by
pressing the
key. By setting “0000” (default), the
password is eliminated.
Paragraph 9 – Flow Alarm
Programming Operation
-
-
Alarms
Alarms
Alarm Flow
Alarm Flow
Alarm Flow - On
Flow Off
Flow Off
Off
On
Signals 6
PROG
+
+
-
-
-
-
-
ESC
This makes it possible to activate (deactivate) the flow
sensor.
When activated (On), press the
key to access the
request for the number of signals that the pump waits for
before an alarm is triggered. The number flashes when you
press the
key, and you can then use the
keys
to set the value. Confirm by pressing the
key. Press
to return to the main menu
