8-
To select any of the pre-set functions, press the
button up to when the required one
is shown on the display. Select the function by
button and the display will blink. Use
and
button to change the mode. Once the required mode has been selected,
press the
button to setup or it will automatically return to the main functions without
any change after idling 8 seconds. To go back to the functions without any change press
the
button. The main functions are shown below:
Press the
button up to when the
is shown on the display. Pressing
button and the display will blink. Use
and
button to change the DMX512
address.
Once the address has been selected, press the
button to setup. Idling 8 seconds
automatically exit menu mode. Back to the functions without any change press
button.
9-
Press the
button up to when the
is showing on the display. Pressing
button and the display will blink. Use
and
button to select the
(show 1) or
(show 2) or
(show 3) or
(show 4) mode. Once the
mode has been selected, press the
button to setup. Idling 8 seconds automatically
exit menu mode. Back to the functions without any change press
button.
Show 1 mode - Fixture is placed on the floor. Tilt movement angle 210°.
Show 2 mode - Fixture is fixed under ceiling. Tilt movement angle 90°.
Show 3 mode - Fixture is placed on the speaker, The spot is always projecting
to the audience’s direction; i.e in front of the stage. Pan movement angle ( left to right to
left ): 160°. Tilt movement angle: 90° ( 60° above horizon; 30° below horizon).
Show 4 mode - Fixture is fixed under ceiling. The spot is mainly projecting in
front of the stage. Pan movement angle (left to right to left) :160°. Tilt movement angle:
90° ( vertically, front 75°; back 15° ) .
Press the
button up to when the
is shown on the display. Pressing
button and the display will blink. Use
and
button to select the
(normal)
or
(2 light show) mode. Once the mode has been selected, press the
button to setup. Idling 8 seconds automatically exit menu mode. Back to the functions
without any change press
button.
Press the
button up to when the
is shown on the display. Pressing
button and the display will blink. Use
and
button to select the
(yes
blackout) or
(no blackout) mode. Once the mode has been selected, press the
button to setup. Idling 8 seconds automatically exit menu mode. Back to the
functions without any change press
button.
Press the
button up to when the
is shown on the display. Pressing
button and the display will blink. Use
and
button to select the
(normal)
4.2. Main Function
MENU
ENTER
DOWN
UP
ENTER
MENU
DMX512 Addre ss Setting
MENU
ENTER
DOWN
UP
ENTER
MENU
Show Mode
MENU
ENTER
DOWN
UP
ENTER
MENU
Slave Mode
MENU
ENTER
DOWN
UP
ENTER
MENU
Blackout Mode
MENU
ENTER
DOWN
UP
ENTER
MENU
Pan Inv ersion
MENU
ENTER
DOWN
UP
