6-
Because of its high internal pressure, there might be a risk that the Discharge lamp
would explode during opera tion . The la mp emits in tense UV radiation which is harmful
to the eyes and skin. The high lu minance of the arc can cause severe damage to the
retina if looks directly at the lamp.
MSD 250W/ NSD 250/2 W
1. Always switch o ff the main supply and never
handle the lamp or luminaire when it is hot.
2. Do not touch the bulb with bare hands. If this
happens, clean the la mp with denatured
alcohol and wipe it with a lint free cloth before
installation.
3. The lamp generates UV radiation. Never
operate the lamp without appropriate shielding.
4. When burning, the lamp operates at high
pressure and there is a slight risk of arc tube rupture. The risk increases with age,
temperature and improper handling of the lamp. Do not use the lamp any longer than its
specified life.
5. Make sure the lamp is located in the center of the reflector for the best spot.
In case of replacement of the lamp or maintenance, do not open the
fixture within 15 minutes until the unit cools down after switching
7-
To show the various menus and the selected functions
DMX
On
DMX input present
MAST ER
On
Master mode
SLAVE
On
Slave mode
SOUND
Flashing
Sound activation
MENU
To select the programming functions
DOWN
To go backward in the selected functions
UP
To go forward in the selected functions
ENTER
To confirm the selected functions
By connecting to CA-8 to control the unit for Stand by, Function, and Mode function.
To adjust the sound-input sensitivity
For DMX512 operation, use 3-pin XLR plug cable to link the unit together.
CAUTION!
Never unscrew the screws of the rotating gobo as the ball bearing
will otherwise be opened!
3. Lamp
WARNING
4. How To Set The Unit
4.1. Control Panel
Display
LED
Button
Re mote controlle r input
Sensitiv ity
DMX input/output
