Shine Plus Maxi Digi
User Manual
Version
0.0.9
Page 5 of 64
4.
Cutting to size
The operation can be performed at the points indicated in the below
illustration. The cutting lengths are ~ 20 mm long, and marked with
drilled holes in the substrate material. Care shall be taken to not
damage the circuit. Use a cutting plier and straight, firm movements
for cutting. Clean the debris at the edges of the pcb after the cutting,
to avoid short circuits.
5.
Installation and connection
The track connections are available in multiple points on both sides
of the boards. Please refer to the following illustrations.
The track polarity has no influence on the lighting module
functionality. We marked however the right track with red
color and the left track with black color to be consequent with the
NMRA recommendations.
