Shine Plus Maxi Digi
User Manual
Version
0.0.9
Page 13 of 64
+
The positive terminal of the capacitor has to be
connected to any of the connections marked with
while the negative terminal to the connection points
marked with
The capacitor connection pads have metallized connections
to the solder side of the boards. If required, the capacitors can
be soldered also to the solder side of the board. Please respect
the corresponding polarity.
The lighting board has a charge/discharge circuit included, so
additional resistor and diode connections are not required.
The module can be fixed to the ceiling of the carriage frame by
double-sided adhesive tape, or can be held in place with the help of
the Shine Pastic Supports (PS Shine).
+
-
-
