Shine Plus Maxi Digi
User Manual
Version
0.0.9
Page 26 of 64
= 1(16): …. by consist address
Bit 5 = 0(0): F12 controlled by individual address
= 1(32): …. by consist address
29
6=
2+
4
0-63
Configuration Data
Bit 0 = 0(0): Locomotive Direction normal
= 1(1): Locomotive Direction reversed
Bit 1 = 0(0): 14 speed steps
= 1(2): 28 /128 speed steps
Bit 2 = 0(0): Power Source Conversion NMRA Digital Only (only DCC)
= 1(4): Power Source Conversion Enabled (DC + DCC)
Bit 3-Not Used
Bit 4 = 0(0): speed table set by configuration variables #2,#5, and #6
= 1(16): Speed Table set by configuration variables #66-#95
Bit 5 = 0(0): one byte addressing (short addressing)
= 1(32): two byte addressing (extended/long addressing)
Bit 6 -Not Used
Bit 7 -Not Used
30
0
0/1
Error CV. If the read out value is “1”, an overcurrent event occurred since
the last reset. The value can be cleared with programming “0” to CV30
33
255=
0-255
F0, Forward move mapping, low byte
Bit 0 = 0(0): Out1 not active on F0 forward
