English
WIRING INSTRUCTIONS
WARNING : ALL APPLIANCES MUST BE
EARTHED.
IMPORTANT : the wires in this lead are coloured in
accordance with the following codes.
Green and Yellow : Earth
Blue :
Neutral
Brown :
Live
Connect the Green/Yellow wire to the terminal in
the plug marked “E” (or by the earth symbol) or
coloured Green.
Connect the Brown wire to the terminal in the plug
marked “L” or coloured Red.
Connect the Blue wire to the terminal in the plug
marked “N” or coloured Black.
Seek professional advice if you are unsure of the
correct procedure for the above.
ABOUT YOUR FACTORY FITTED PLUG
The cord is already fitted with a plug incorporating
an appropriate fuse. If the plug does not fit your
socket outlet, see paragraph below. Should you
need to replace the fuse in the plug supplied, an
appropriately rated approved BS 1362 fuse must be
used (refer to electrical specification for fuse
rating).
If the plug supplied does not fit your socket outlet,
it should be removed from the mains lead and
disposed of safely. The flexible cord insulation
should be stripped back as appropriate and a
suitable alternative plug fitted. The replacement
plug must be equipped with an appropriate fuse. If
the plug has external access to the fuse (non-
rewirable type plug) please note that the fuse cover
is an important part of the plug. Please ensure that
it is always refitted correctly. If you lose this cover,
please do not use the plug. You may contact our
helpline for a replacement.
For any problems or queries, please contact our
helpline :
0845 602 1454 - UK (calls charged at local rate)
(01) 412 3000 - Ireland
For U.K. users only : additional
information and instructions
N: Blue
or black
E: Green and
yellow or green
L: Brown
or red
Fit correct
fuse(13 amp)
fuse(13 amp)
Use cable
gripper
Summary of Contents for WAFFLE MAKERS
Page 1: ...R www tefal com ...
Page 39: ...Opskrifter Danish ...