19
GB
Pour the water into the
opening (8a) provided for this
purpose at the rear of the
base of the appliance (8).
If your appliance is not equipped with
support legs (
– *11/*12/*13), place it on
a stable heat resistant surface.
Do not use it on a flexible type of support,
such as a rubberised protective cloth.
Never place the appliance directly onto
a fragile surface (glass table, cloth,
varnished furniture…).
To avoid overheating of the appliance,
we recommend you do not place it in a
corner or against a wall.
Unwind the cord completely.
Check that your electrical installation is
compatible with the power and the
voltage indicated under the appliance.
If the power supply cord is damaged, it
must be replaced by the manufacturer
or its service agent or a similarly qualified
person in order to avoid any danger.
If an extension cord is used, it must be
with an incorporated earth connection;
take every precaution to ensure that
people cannot become caught up in it.
This appliance is not intended to be
operated by means of an external timer
or separate remote-control system.
Plug the cord into the mains.
Never use the appliance when it is empty.
Never use the appliance with the
protection lid (2) closed.
Set the thermostat to the Maxi position.
Leave to pre-heat the appliance for
10-15 minutes.
On first use, the appliance may smell
slightly and possibly give off smoke for the
first few minutes – this is normal.
Never leave the appliance unattended
when in use.
WARNING: Charcoal or similar
combustible fuels must not be used with
this appliance.
D
E
D
The appliance should be supplied
through a residual current device (RCD)
having a rated residual operating
current not exceeding 30 mA.
The appliance is to be connected to a
socket-outlet having an earthing
contact (for class I appliances).
The power supply cord should be
regularly examined for signs of damage
and the appliance is not to be used if the
cord is damaged.
Cooking
After pre-heating, the appliance is ready to
be used.
Set the thermostat to the position of your
choice.
Leave to cook depending on your taste.
Ensure that there is always water in the
base during the use of the appliance.
If water needs to be added
during cooking, pour it into
the opening (8a) provided for
this purpose at the rear of the
base of the appliance (8).
Do not touch metallic parts while the
appliance is on as they are very hot.
Do not cook food in tinfoil.
Never place aluminium foil or anything
else between the grill plate and the food
to be cooked.
Never put aluminium foil in the reflector.
Do not place cooking utensils to heat on
the appliance.
NB: Cooking fumes may be dangerous
for animals with particularly sensitive
respiratory systems, such as birds and
small mammals. We advise owners to
keep them away from the cooking area.
After use
Never leave the reflector in the water
between each use.
Set the thermostat to the min. position.
D
Grill'n Pack 03-08 5/03/08 15:05 Page 19
