EN
FR
EL
AR
FA
Using the 2in1: bowl + tray
Get your food ready
• Open the lid
– fig.1.
• Remove the 2in1 spoon and the tray
– fig.3.
• Lift the handle up - fig.4 and remove the bowl from the appliance
• Place your food in the bowl making sure you always keep to the
quantities recommended in the cooking tables and/or the recipe book
(please see “Cooking table”). Never exceed the "MAX“ level marker on
the paddle
– fig.10.
• Depending on the food, add the recommended amount of fat in a
spoon and pour the contents evenly in to the bowl
– fig.11
• Put the bowl back in the appliance and close the lid.
• Fold away the handle
– fig.12.
Start 2in1 cooking
• Connect detachable power cable to the appliance and plug it in
–
fig.13.
• Push the switch 0/| , the appliance will make a beep sound and the
screen displays 00
– fig.14.
• Adjust the total cooking time (=cooking the food in the bowl) using
the buttons
(see “Cooking table“)
– fig.15.
• Select the type of food you want to cook in the tray using the button
– fig.23
and
24.
• Adjust the cooking time for the tray using the buttons
(please see “Cooking table”).
• Push the start button
. The cooking starts.
• The minute by minute countdown starts.
• Place the food on the tray making sure you don’t exceed the maximum
level
– fig.22.
• When the appliance beeps and stops automatically, open the lid and
put the tray in
– fig.25.
• Close the lid again and press the start button
.
• The countdown resumes.
Remove your food
• When cooking is finished, the timer will sound and the screen will start
blinking and displaying 00: the appliance automatically stops cooking
your food. You can stop the buzzer by pressing on the start button
– fig.19.
• Open the lid
– fig.20.
• Lift up the handle until you hear the “CLICK”
– fig.21.
• Disconnect the two handles by pressing the button 10b.
• Turn over the tray handle so that it can fit on to the tray
– fig.26.
• Remove the tray and take your food out
– fig.27.
• Remove the bowl and take your food out.
2
in
1
2
in
1
2
in
1
2
in
1
11
Be careful, because the tray
is very hot after cooking.
Always use the tray handle
to remove it. If you want
even crispier fries, you
can cook them for a further
2 minutes after you’ve
removed the tray.
There is a pre-set time for
each type of food which you
can adjust.
When you are not using it,
the appliance will
automatically switch itself
off after 10 minutes.
ACTIFRY2EN1_1505087478_Mise en page 1 28/02/12 12:54 Page11
