User Guide - 2.19 MIDI
Teenage Engineering
– User Guide (LD)
Janvier 2019
44/59
2.19 MIDI
MIDI introduction
Each of the OP-Z's 16 tracks can both send and receive midi. The outgoing cc values of each
parameter on each track can be assigned a custom control number. The outgoing channel of
each track can also be customized.
External clock
Sending a midi timing clock to your OP-Z will automatically put it into external sync mode. This
is indicated by four green LEDs showing the current tempo when
TEMPO
button is held.
MIDI config shortcuts
MIDI settings for the OP-Z can be configured via the module track.
First go to the module track by holding
SHIFT
and pressing
MODULE
.
The midi settings are turned on/off by holding
SHIFT
and then pressing the
corresponding
keys
while in the module track.
key combination
setting
description
shift + 1
channel one to active
any incoming midi on channel 1 is redirected to the currently
active track
shift + 2
incoming midi
enable incoming midi
shift + 3
outgoing midi
enable outgoing midi
shift + 4
midi clock in
enable incoming midi clock
shift + 5
midi clock out
enable outgoing midi clock
shift + 6
enable program change
enable program change in/out
shift + 7
alt program change
On: use bank 1‒16 / program 1‒16 to set active pattern.
off: pattern 1‒16 is activated with bank 1 /Program 1‒128 and
bank 2 / program 1‒32
shift + 8
midi echo
echo incoming midi back on same port
shift + track 1 - 16
mute track
Mute the outgoing midi on the corresponding track
MIDI config content mode
Use the
“midi.json” file found in content mode to customize the OP-Z midi configuration.
The available settings are as follows:
setting
range
description
channel_one_to_active
true / false
any incoming midi on channel 1 is redirected to the
currently active track
incoming_midi
true / false
enable incoming midi
outgoing_midi
true / false
enable outgoing midi
timing_clock_in
true / false
enable incoming midi clock
timing_clock_out
true / false
enable outgoing midi clock
enable_program_change
true / false
enable program change in/out
alt_program_change
true / false
True: use bank 1‒16 / program 1‒16 to set active pattern
false: pattern 1‒160 is activated with bank 1 / program 1‒128
and bank 2 / program 1‒32
midi_echo
true / false
echo incoming midi back on same port
track_enable
true / false
Enable midi per track
track channels
1 ‒ 16
set outgoing channel per track
parameter_cc_out
0 ‒ 255
set outgoing cc value per parameter per track
