User Guide - 2.7 Project
Teenage Engineering
– User Guide (LD)
Janvier 2019
25/59
2.7.10 Bounce pattern
Press and hold
PROJECT
and
REC
to render a 10 second audio file of the current
pattern.
The audio file will be saved to disk along with a copy of the project.
You can store up to 5 bounces. Trying to store more than 5 bounces will result in a red led
flash. Use content mode to access your bounces.
Pro-tip: if you have an active pattern chain this will be bounced to disk. (Still limited to 10 sec)
2.7.11 Snapshot
Hold PROJECT and + to
store a snapshot of the
current project. any
previous snapshot will be
overwritten
Hold PROJECT and – to recall the stored project snapshot. Any
changes made since storing the snapshot will be overwritten
2.7.12 Saving
Auto save
By default, any
changes to a project is
automatically saved
and there is no need
to save manually
manual save mode
You can toggle manual
save mode and disable
auto save by holding
PROJECT and TRACK
for a few seconds
manual save mode
(alt.)
You can also hold
PROJECT while turning
on the power on OP-Z
to start in manual save
mode.
This can handy when
lending your OP-Z to
your friends and not
risk losing any of your
patterns
manual save
To manually save a
project press and hold
PROJECT and hold the
desired project slot
using the “value keys”
1-0
2.7.13 P app
When paired with the OP-Z app, holding
PROJECT
will display the project page.
The project page gives an overview of the current project, pattern and pattern chain.
There are also some handy shortcut hints for button combinations, as well as visual progress
feedback when performing operations.
