29
NT311 ETH
The following screen will be displayed:
To check the programmed parameters or repeat programming, follow the TELNET SCREEN
from step 12 to step 19, page 27.
Indications of LEDs 1-2 of the
Ethernet port:
LED 1: Link
➢
Off = No link
➢
Amber = 10 Mbps
➢
Green = 100 Mbps
1
2
LED 2: Activity
➢
Off = No Activity
➢
Amber = Half Duplex
➢
Green = Full Duplex
4) Enter the new Telnet Password (4 digits max), press ENTER; if you wish to keep the set
Password, press ENTER.
Type in: S to save the modified data.
Q to exit Telnet without saving the data.