25
NT311 ETH
X Windows Vista, 7, 8.
ETHERNET MODULE PROGRAMMING PARAMETER
ETH0 CONNECTIONS
Using an Ethernet cable, connect the ETH0 RJ45 of the NT311 ETH control unit to the Ethernet card of a PC.
TELNET ENABLING
Use the Telnet program to set the Ethernet IP parameters.
1) START menu (Windows) If already enabled, the program appears
2) Start the search with the Telnet program Press ENTER to launch the program.
Entering telnet in SEARCH.
If the Telnet program is not enabled:
3) START menu (Windows):
(Jump to step 12 page 26)
5) Select Control Panel
(Go to step 12 on page 28)
4) Select Control panel
