Operating manual
E3907
2
BE 984 i
www.tecsis.de
- If parts of the device are loose or slack
- If the connection cables show visible damages
Furthermore, we point out that all obligations of tecsis exclusively result from the respective sales contract in which
the guarantee has been conclusively settled.
1.2 Intended use
Tecsis devices shall be used exclusively for measurement tasks and directly related control tasks. Any other usage
is considered as not intended.
1.3 General dangers
The equipment is state of the current safety requirements. Residual risks arising from the machine when it is
operated by untrained personnel and operated inappropriately. Any person who is in charge of installation,
operation, maintenance and repairs of the device has to read the manual and especially the safety instructions must
been read and understood.
1.4 Residual dangers
Safety engineering considerations of measurement technology have to be planned by the system designer /
equipment providers / operators to realize and take responsibility for that residual risks and to keep them as low as
possible. The relevant regulations and laws must be observed. Residual risks or dangers associated with the
measurement device should be noted.
1.5 Notes identification
Should there be any residual dangers in working with the device, this manual will refer to it with following signs:
Warning:
Possible risk of serious or life-threatening injuries. The accident prevention regulations have to be
recognized.
Attention:
Indicates a potential risk for damage to the product, process, person or environment.
Notation:
Additional information.
Important:
Reference to more detailed technical information.
1.6 Health and safety rules
To make sure our products cause no eventual risks or health threads, please mind the following health and safety
rules:
1. Please read all relevant sections of these instructions carefully before beginning work.
2. All warning labels on containers and packages must be observed.
3. Installation, operation, maintenance and repair work may only be performed by trained personnel in accordance
with the instructions given. If one of these instructions is not met, the users of the product are solely responsible for
all consequences
