Tecomec Midi Jolly-N, Owner'S Manual

Page: 6 / 56

4
EN
A copy of this manual is delivered with each grinder.
NB: The descriptions and illustrations contained in this manual
are not binding. The manufacturer reserves the right to bring
about any modifications without updating this manual.
ELECTRICAL CHAIN GRINDER FOR SAWS
midi jolly-N
230 V~ -
midi jolly-N
120 V~
easy grinder
230 V~ -
easy grinder
120 V~
CHARACTERISTICS OF THE MACHINE
- Manufacturer: Tecomec
- Machine: Electrical chain grinder midi jolly-N – easy grinder
for saws
DATA AND MODELS
- models:
midi jolly-N
230 V~ -
midi jolly-N
120 V~
easy grinder
230 V~ -
easy grinder
120 V~
- installed power: electrical motor 50Hz 85
W
voltage 230V~ – 60Hz
85
W
voltage 120V~
- insulation class II
- grinding wheel dimensions: outside diameter105mm, inside
diameter 22.3mm
- thickness: 3.2 – 4.7 – 6mm
- maximum speed: 7000 min -1 (15 min)
- sound pressure level: 76dB (A)
- level of vibrations transmitted to the handle: < 2,5 m/s
2
- The declared vibration total value has been measured in
accordance with a standard test method and may be used for
comparing one tool with another.
- The declared vibration total value may also be used in a
preliminary assessment of exposure.
- the vibration emission during actual use of the power tool
can differ from the declared total value depending on the
ways in which the tool is used; and of the need to identify
safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as the times
when the tool is switched off and when it is running idle in
addition to the trigger time).
- type of chains: pitches – 1/4” .325” – 3/8” – .404”
- weight of the complete machine: 24.5N (2,5 kg)
- accessories provided: 1 wheel thickness: 3.2 mm (1/8”), 1 Front
protection, 1 Shield guard screw, 1 Rear fih ed protection, 1 dressing
stone; 1 template ; 1 handle. 1 screw M6x25.
Option: 1 grinding wheel with 4.7 mm thickness (3/16”).
INTRODUCTION
Keep this manual with care.
To ensure the correct use of the grinder and to prevent accidents,
do not start working without having read this manual carefully.
This manual explains the operation of the machine components and
provides instructions for carrying out the checks and maintenance
required.
WARNING – Any maintenance operations not described in
this manual shall only be carried out by an authorized service
center.
To guarantee the efficient and consistent operation of
your grinder, worn or broken parts shall only be replaced using
ORIGINAL SPARE PARTS .
SAFETY
ATTENTION! When you use electrical machines, you
should always observe basic safety precautions to
reduce the risk of fire, electric shocks and personal
injuries.
- Do not leave the machine out in the rain.
- Do not use the machine in damp or wet places.
- Keep the work area well lit.
- Do not use the machine near flammable liquids or gas.
- Make sure the voltage and the frequency written on the rating
nameplate match those of the mains.
- Make sure the switch is turned off (pos. 0) before you plug the
machine into the mains to prevent it from starting up accidentally.
- Unplug the machine from the mains when it is not in use, before you
start any maintenance jobs and when you replace any accessories
(i.e. grinding wheel).
- Before you actually use the machine, make sure it is able to work
appropriately and efficiently: check the integrity of the shield guard
in particular.
- Check the alignment and adherence of moving parts, make sure
nothing is broken, check the overall assembly and any other
conditions that may affect operation.
- The grinding wheel safety guards and any other parts damaged
shall be repaired or replaced by a skilled technician, unless specified
otherwise in this manual.
- Have faulty switches replaced by a skilled technician.
- Keep anyone that is not involved in the job well away from the work
area, especially children. Do not let them touch the machine or the
extension lead.
- Wear safety goggles and gloves.
- Wear a face mask or dust mask if the process creates dust.
- Do not wear baggy clothing or jewelry, which could get caught up in
moving parts.
- Wear a protection cap and tie long hair back.
- Wear non-slip shoes when working outdoors.
- Always stand appropriately and balanced on both feet.
- Always keep your eyes on the job, without distraction. Use your
common sense and do not use the machine if you are tired.
- Always make sure the hex spanners have been taken off the
machine before using it.
- Keep the work area clean and tidy. Untidy work areas and benches
could cause accidents.
- Do not touch earthed surfaces with any part of your body.
- Always use the vise to firmly hold the chain to be sharpened. Never
sharpen the chain while holding it with your hands.
- Do not force the machine to work at a higher speed than that
envisaged.
- Never stop the grinding wheel with your hands, even after the motor
has been switched off.
- When using the machine outdoors, use extension leads approved
for such use and marked accordingly.
- Never pull on the power cable to unplug the machine from the
mains. Keep the cable away from heat, oil and sharp edges.
- Do not use the machine if the switch does not switch on or off.
- The use of accessories (i.e. grinding wheel) different from those
recommended by the manufacturer could cause injuries.
- Do not tamper with the safety devices.
- Look after the machine with care.
- Follow the instructions when replacing accessories.
- Every now and again, visually check the machine cable and have it
repaired by a specialist if you should notice any damages.
- Every now and again, visually check the extension leads and
replace them if damaged.
- Keep the operating handles dry, clean and free from oil and grease.
- When the machine is not used, keep it in a dry and safe place away
from children’s reach.
- This electrical machine complies with related safety provisions.
Repairs shall be carried out exclusively by a skilled technician,
using exclusively OEM spare parts, otherwise whoever uses the
machine could be in serious danger.
- Use a proper electric tool.
- Do not use low effective tools for heavy duty applications.
INTENDED USE
This machine is an electrical grinder for chains used in chain saws.
- Use the machine exclusively for the types of chains stated in the
technical data chart.
- Do not use the machine to cut or grind anything other than the
chains envisaged.
- The machine must not be used in corrosive or explosive
environments.
- Any other use is to be considered improper.
The manufacturer is not liable for damages following improper or
incorrect use of the machine.