1
Foreword
To fully employ all functions of this T-verter and to ensure the safety for its users, please read
through this operations manual in detail. Should you have any further questions, please feel free to
contact your local distributor or regional representative.
PLEASE READ AND UNDERSTAND THIS MANUAL BEFORE
OPERATING THIS T-VERTER
The T-verter is a power electronic device. For safety reasons, please read carefully those
paragraphs with “WARNING” or “CAUTION” symbols. They are important safety precautions to be
aware of while transporting, installation, operating or examining the T-verter. Please follow these
precautions to ensure your safety.
WARNING
Personnel injury may be resulted by improper operation.
CAUTION
The T-verter or mechanical system may be damaged by improper operation.
WARNING
z
Do not touch the PCB or components on the PCB right after turning off the power before the
charging indicator went off.
z
Do not attempt to wire circuitry while power is on. Do not attempt to examine the components
and signals on the PCB while T-verter operating.
z
Do not attempt to disassemble or modify internal circuitry, wiring, or components of the
T-verter.
z
The grounding terminal of the T-verter must be grounded properly (200V class: Ground to 100
Ω
or less, 400V class: Ground to 10
Ω
or less).
z
This is a product of the restricted sales distribution class according to EN61800-3.
In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.
CAUTION
z
Do not attempt to perform dielectric strength test to internal components of the T-verter. There
are sensitive semiconductor-devices vulnerable to high voltage in the T-verter.
z
Do not connect the output terminals: T1 (U), T2 (V), and T3 (W) to AC power input
z
The CMOS IC on the primary PCB of the T-verter is vulnerable to static electrical charges. Do
not contact the primary PCB of the T-verter.
