Chapter 9 Expansion Module
238
Configure
You can use Local area network or Ethernet to configure this module. In the Ethernet this module need to have
the IP address that can visit. You can obtain the IP address through the Network address Translation or The manager
of the Ethernet. In the Local area network, please be sure to follow the procedures given below.
1. Click
Start
in the Windows Taskbar
→
Programs
→
XPortInstaller
→
XPortInstaller.
2.
Click the
Search
icon
and choose it.
A. Hardware Address
The format: 00-20-4A-XX-XX-XX, where the XXs are unique numbers assigned to the product.
B. IP Address
EN01 must have a unique IP address on your network. The systems administrator generally provides the IP
address, subnet mask, and gateway. The IP address must be within a valid range, unique to your network, and in
the same subnet as your PC. The format: 0.0.0.0 (e.g. 10.128.19.119).
3. Click the
Assign IP
icon
.
Click the
Assign IP
icon Enter the IP address Format and click
OK
Note:
Enter the IP address Format: 0.0.0.0, and click
OK.
Waiting
for about 10Sec and the
window displays in your window, click
OK.
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
