ENGLISH
UPS EVO DSP PLUS 1.2-2.4-3.6 MM
7
User’s manual
4.6
CONVERTER FREQUENCY Mode
It is possible to select the Converter Frequency mode to work with the Output Frequency different from the Input
Frequency. For example it is possible to work with 60 Hz Input Frequency and 50 Hz Output Frequency or 50Hz
Input Frequency and 60 Hz Output Frequency.
Please contact Technical Service for the instruction to enable the Converter Frequency mode; by default
Converter Frequency mode is disable, and the Output Frequency will synchronize automatically with the Input
Frequency; by default the Converter Frequency mode is disable.
The Converter Frequency mode is identified by:
•
The graphic LCD panel shows the path of energy flow
during Converter Frequency mode.
•
The “CF” characters are ON.
5
EXTERNAL DESCRIPTION
5.1
Front Panel
The front panel informs the user about operating status, alarm conditions and measurements. It also provides
access to controls and configuration parameters.
Front panel shown below consists of two parts:
1.
Graphic LCD panel provides complete information about the energy flow path and existing alarms, Load and
Battery level, Input, Output and Battery measurements.
2.
3 buttons enables the user to turn ON/OFF the UPS and to make selections of the functioning parameters.
Figure 2 – Front panel
ON
/
MUTE
SELECT
OFF/ENTER
