ENGLISH
UPS EVO DSP PLUS 1.2-2.4-3.6 MM
11
User’s manual
5.1.3 Acoustic Alarm
UPS status
Acoustic Alarm
OFF
Battery Mode
Beeping once every 4 seconds
YES
Low Battery
Beeping once every second
NO
Overload
Beeping twice every second
Fault Mode
Beeping continuously
Bypass Mode
Beeping once every 10 seconds
Note:
OFF = YES
: means that the buzzer can be muted or stopped, by pressing
ON/MUTE
button.
OFF = NO
: means that the buzzer can NOT be muted or stopped
5.2
Rear Side
Figure 4 – Rear Side
1.
Computer Interface (USB connector
)
:
it is the communication USB port.
2.
Slot for SNMP Interface (optional), replacing USB.
3.
Telephone Protection (RJ11/RJ45 IN/OUT connectors):
to protect and filter a phone line, an ADSL or a LAN
(TNV-3 type
connections)
.
4.
Grounded AC Input power socket:
IEC C14 type for EVO DSP PLUS 1.2-2.4 MM and IEC C20 type for EVO DSP
PLUS 3.6 MM; to connect the UPS to the AC utility line by the included power cord.
5.
Input Circuit Breaker:
it goes off in Overload or short-circuit condition; push the external button of the
Circuit Breaker to reactivate it.
6.
Grounded Output Receptacles:
IEC C13 type.
7.
Output Circuit Breaker
. It goes off in overload or short-circuit condition; push the external button of the
Circuit Breaker to reactivate it.
8.
Grounded Output Power Receptacle:
IEC C19 type; For connecting an Output power line to supply all the
devices to be protected.
EVO DSP PLUS MM 3.6 KVA
EVO DSP PLUS MM 1.2-2.4 KVA
1
2
3
5
4
6
1
3
2
5
4
8
7
6
