3 Predispositions
Electricity
The electrical connection of the system dashboard to the main switchboard and the synchronization
of the different parts of the machine have to be done by specialized and qualified personnel, by
respecting the electrical schematics and the provisions of the local Norms about safety in working
sites and electrical systems.
The Manufacturer is not responsible for damages to properties, people and animals resulting
by the non-compliance of such provision.
Provide connections for the grounding of the machine.
Fresh water
This wheel washing unit is a “closed loop system” where wastewater are continuously treated and
recycled. Nevertheless, a quantity of fluid may remains on the treated vehicles according to the
vehicles shape and arrangement.
Because of this, the connection to a water refill source is recommended in case of intensive use.
Appropriate and full automatized refill groups are available as optional spare part.
Contact the manufacturer for technical information, availability and quotation.
Drain water
According to the environmental condition, system configuration, vehicle's shapes and other factors,
drain waters can be present.
The physical delimitation of the washing area, including in and out lanes, and the management of
opportune drain points have to be considered for safety and ecological reasons.
WARNING :
All predispositions are always in charge and under the responsibility of the user.
Tecnoter srl unipersonale
Wheel washing
system
RC4.32
E16CL4
S/N
Page 18/39
Rev: 1.42 –
22/02/2017