Tecnospiro Roscamat TS-VIII, Instruction Manual

Page: 13 / 24

TS VIII PNEUMATIC MOTOR 13
5 OPERATION
WARNING
✓
The sequence described below is for information only and assumes that the installation, adjustments
such as the installation of the module, reducers (if applicable), tap holder (with or without clutch) and
tap have been carried out beforehand.
✓
Use the necessary personal protective equipment described in
[See
PERSONAL PROTECTIVE
EQUIPMENT (PPE)
pg.7].
✓
Ensure that you have a machine configuration suitable for the characteristics of the thread cutting
operation.
✓
Ensure that the necessary adjustments have been made to suit the nature of the work to be carried
out.
✓
Ensure that the materials with which you are going to work (cutting threads), meet the requirements
described
[See
TECHNICAL SPECIFICATIONS
pg. 11].
✓
The parts to be worked on must be properly secured.
5.1 THREADING OPERATIONS
Follow the steps below to ensure precise and safe thread cutting operations.
1- Connect the motor to the pneumatic system.
2- Press and hold lever 1 (1) for thread cutting operations (clockwise rotation).
3- Press and hold down the reversing button (2), for unscrewing operations (anti-clockwise
rotation).
1
Buttons (1) and (2) are press-and-hold type buttons, preventing the machine from operating without
intervention/supervision of an operator.