TS VIII PNEUMATIC MOTOR
7
Warning. General warning
symbol. This symbol is
usually
accompanied
by
another symbol, or a more
detailed description of the
danger.
Crushing hazard.
2.6
SYSTEM INTEGRATOR
The system's integrator or end user is
responsible for integrating the machine in
the installation, respecting all the relevant
safety measures.
The integrator/end user is responsible for the
following tasks:
✓
Location and correct installation.
✓
Connections.
✓
Risk assessment.
✓
Facilities with the necessary safety and
protection functions.
2.7
PERSONAL PROTECTIVE
EQUIPMENT (PPE)
Personal protective equipment required
during the transport, assembly and
installation, commissioning and dismantling
of this machine: safety boots, safety
helmet, safety goggles and safety gloves.
Safety footwear, safety gloves and safety
goggles for set-up and training, operation
and troubleshooting.
It is the responsibility of the integrator/end
user to define the personal protective
equipment required based on the final
application of the machine, in order to
comply with the essential health, safety and
hygiene requirements.
Operators should not wear loose clothing,
rings or bracelets that may fall within the
mechanism of the equipment.
It is also mandatory to wear hair tied back to
avoid snags with the moving parts of the
machine.
