Tecnospiro Roscamat TS-VIII, Instruction Manual

Page: 22 / 24

TS VIII PNEUMATIC MOTOR 22
11.5 THREADING ACCESSORIES
QUICK-CHANGE TOOL HOLDERS
Includes a wide range of tap holders with and
without clutches, as well as other tools for rapid
clamping of different tools, such as drills,
countersinks, dies, socket spanners, etc.
Tap holder with safety clutch
(so that it slips when it reaches the bottom of
the hole)
Tap holder without safety clutch
(for clamping of various tools with cylindrical
shank and square drive)
Type 1 - Ø19 mm: capacity M2-M16
(for modules 300, 550, 750, 1050)
Type 2 - Ø 31 mm: capacity M14-M30
(for modules 90, 170)
Type 3 - Ø 48mm: capacity M30-M42
(for modules 40)
STANDARDISED MEASURES
Metric
Ø
Coupling Ø
Shank
□
Standard
M3 19 3.5 2.7 DIN 371
M4 19 4.5 3.4 DIN 371
M5 19 6 4.9 DIN 371
M6 19 6 4.9 DIN 376
M7 19 7 5.5 DIN 376
M8 19 8 6.2 DIN 376
M10 19 10 8 DIN376
M12 19 9 7 DIN 376
M14 19/31 11 9 DIN 376
M16 19/31 12 9 DIN 376
M18 31 14 11 DIN 376
M20 31 16 12 DIN 376
M22 31 18 14.5 DIN 376
M24 31 18 14.5 DIN 376
M27 31 20 16 DIN 376
M30 31/48 22 18 DIN 376
M33 48 25 20 DIN 376
M36 48 28 22 DIN 376
M39 48 32 24 DIN 376
M42 48 32 24 DIN 376
DIE STOCK
For threading with dies
Capacity of M5-M24
LONG DIE HOLDER
For guided threading with dies.
Types:
-Long die stock 19/1 M5-M6
-Long die stock 19/1 M8
-Long die stock 19/1 M10
-Long die stock 19/1 M12-M14
-Long die stock 31/2 M16-M18-
M20
Other sizes: please ask
Capacity: M6-M27
QUICK-CHANGE EXTENSION
For 80 mm spacing of the tool
from the head and for access
to difficult areas
Ø coupling = Ø19 mm
REDUCING BUSH
For adapting different tap holder
coupling diameters to modules
with different output diameters.
PROBES
Two models available 19 and 31. Tools for thread
cutting in inclined positions