GB / IE - 3
5410.498.00
Cleaning and care of the appliance
The unit must be cold to clean it.
Do not wash the appliance with water jets, as water might
reach the electric components, resulting in faulty operation
and damage to safety systems!
Keeping the appliance clean is very important for a long and trouble-free
working life. The removable parts should be washed separately with
warm water and detergent, then rinsed in running water.
Do not use harsh or abrasive detergents to clean the stainless steel
parts. Iron cleaning pads should not be used as they cause the formation
of rust. For the same reason, avoid contact with ferrous materials. When
cleaning, avoid using abrasive paper or cloth; we recommend using
sponges (ex. Scotch Brite) to remove stubborn deposits. You can also
use common sprays for cleaning ovens and grills to remove stubborn
deposits. If spray products are used, follow the manufacturer’s
instructions.
To minimise the emission of polluting substances in the environment we
suggest cleaning the appliance with products that are at least 90%
biodegradable.
If the appliance will not be used for a long period of time, it should be
thoroughly be cleaned, and covered with a protective sheet of plastic of
the type commonly found in shop.
Safety Thermostat
The appliance is equipped with a safety thermostat which cuts off the
electric power supply in case of irregular operation.
To turn the appliance on again, press button “
E
” (fig.3).
This must be done by a specialised technician.
Replacing parts
Only qualified personnel should replace faulty parts. Prior to
commencing any kind of work, disconnect the unit from the gas
distribution network.
After having removed the control panel, all the functional parts of the
appliance are easily accessible.
Only order spare parts from the manufacturer or an authorised reseller.
Maintenance
The appliance needs no specific maintenance besides normal cleaning; we do however suggest having it checked once a year by the assistance
centre for which, we recommend drawing up a maintenance contract.
Safety precautions
REMEMBER THAT THE APPLIANCE:
Must never be left unattended when it is being used!
When the unit is switched on, its surfaces get very hot so please
take great care!
The appliance is intended for professional use and therefore only
qualified personnel should use it!
Installation as well as any conversion or adaptation to a different
type of gas must be carried out in accordance with current laws
and only by qualified and authorized personnel.
At least once a year have the appliance checked by qualified
personnel.
All the parts that come into contact with oil or fat during use,
should be cleaned regularly as indicated in the chapter “Cleaning
and Care”.
Ecology and the Environment
Our appliances are studied and optimised, with lab tests, to provide high
performance and yields. However, to keep energy consumption low
(electricity, gas and water), we suggest not using the appliance for any
length of time if it is empty or in conditions that compromise optimum
yield.
All packaging materials are environment-friendly. They can be kept
without problem or burnt in a waste incinerator plant. The plastic
components that can be recycled are:
Polyethylene: external packaging material and/or pluribol film
Polypropylene: straps
Polystyrene foam: corner pieces, sheets and protection blocks
At the end of the appliance’s useful life, dispose of it properly.
90% of each appliance is made of metal (stainless steel, iron,
aluminated sheet, etc.) hence it can be recycled by the relative recycling
organisations in compliance with the standards in force in your country.
Prepare the appliance for disposal, so it cannot be used any more, by
removing the power cable and any locks so that no one can get locked
inside accidentally.
The Manufacturer declines any responsibility for
damage caused by improper or incorrect installation
or maintenance of the appliance, or failure to
observe safety regulations!
