29
Petrol
Oil for 2-stroke engines
2,00 L
50 ml
3,00 L
75 ml
4,00 L
100 ml
Method of mixing
40 parts 1 part 2-stroke oil
Starter cord
(Fig. 5)
Pulling the cord (C) starts the motor.
Choke lever
(Fig. 5)
The choke lever (A) closes and opens the choke in the carburettor. In the position, the air-petrol-mixture is enriched for the
motor‘s cold start. The position is used for the operation of the motor and for a warm start.
Operation
Before commissioning, it is important that you know and follow the safety notices.
For all work on the earth auger, you must turn off the motor, disconnect the spark plug connector and wear safety gloves. Start
the auger only after complete assembly and checking it.
WARNING! Carefully read the safety notices (see „Safety notices“ and additional notices for petrol-powered machines).
Warning! Wear safety boots and tight-fitting clothes in order to prevent injuries.
Before commissioning, it is important that you know and follow the safety notices
Observe national stipulations during work when using the auger on public property or paths.
Keep adults, children and animals away from the hazardous area.
Check the working environment for foreign bodies and remove them.
When leaving the machine, the motor must always be turned off.
Check the earth auger for correct functioning and its safe operating condition.
Do not work by yourself, someone has to be close in case of emergencies.
Hold on to the earth auger with both hands when working.
Ensure you have a safe position, during the drilling process as well.
Do not lean too far forwards when working.
Check for a flawless idling mode. The auger must not rotate in idling mode when the motor is warm.
Immediately turn off the motor when you can feel changes to the machine‘s behaviour.
Do not place the hot auger in dry grass or on flammable objects (fire risk!).
Drill the hole in the ground in several sections so you can remove the soil in between.
Keep the auger vertical, do not twist it!
Always secure bore holes, otherwise there is a risk of injury!
Exclusively drill holes in soil with the earth auger.
Other applications are not permitted.
Starting the motor:
(Fig. 4 - Fig. 5)
If the motor is cold, turn the choke lever (Fig. 5, A)
If the motor is warm, turn the choke lever (Fig. 5, C) to the position.
Prime the fuel pump (Fig. B) by pressing it several times until you can see fuel in the pump.
Put the stop switch (Fig.4 A) in the „start“ position.
Lightly pull on the starter cord (Fig. 5, C) until you can feel resistance, then pull on the cord strongly 2-3 times until
the motor fires briefly.
CAUTION!: Do not pull out the starter cable more than approx. 50 cm, and lead it back by hand. For efficient starting, it is
important to pull the starter cable quickly and powerfully.
Turn the choke lever (Fig. 5, A) to position.
Pull the starter cord 2-3 times again until the motor fires and runs in idle mode.
Warning! The earth auger only begins to rotate when the throttle lever is used.
