TSR 2800-20-DC Router’s Hardware Installation Manual
- 18 -
Figure 4-1 Inserting and plugging the SDRAM
Figure 4-2 SDRAM bar
Note:
If the SDRAM slot cannot be broken off, check whether it is locked. Slowly break off
the pinchcock at both sides of the SDRAM SIMM slot according to the previous
method.
After taking off the original SDRAM bar, make the brim of the gold finger of the SDRAM
bar point down. See figure 4-2.
A. Tilt the SDRAM extensible bar to 45 degree and push it into the extensible slot.
B. Lightly push it upwards and make two locating steel slices tie the circuit board.
