TSR 2800-20-DC Router’s Hardware Installation Manual
- 11 -
1. Console port
The console port has a rate of 1200bps to 115200bps and a standard RJ45 plug, the
parity check is an option for the console port and the flow on the console port can be
controlled. Before configuring and monitoring the router, you must connect the console
port and the terminal (such as STAR-510G
+
) or PC’s serial port through specific
monitor cable and then run terminal imitation software (Windows super-terminal). The
cable is provided according to the host. The communication parameters of the terminal
serial port can be set to a rate of 9600bps, eight data bits, one stop bit, no sum check
bit and traffic control.
The RJ45 connector of the console port is shown in the following figure. The RJ45 plug
corresponds to the RJ45 socket, whose pins can be aligned from left to right with the
value from 1 to 8.
The following figure shows how to connect the console port of TSR 2800-20-DC
modularized router and the computer:
