Version 5.0 DUT-E Installation Manual
© 2007-2011, JV Technoton 3 of 30
Introduction
Recommendations and regulations given in the installation manual are referred to fuel level
sensors DUT-E (hereinafter DUT-E), developed by JV Technoton CJSC, Minsk, Belarus. This
document defines the procedure for installation and connection of DUT-E, as well as
provides guidance/recommendations on the operation.
DUT-E are used for accurate measurement of liquid fuel level in the vehicle tanks and in
fixed/immovable tanks.
DUT-E can be used as a standard sensor of the fuel-level indicator, as well as a part of the
fuel consumption control and vehicle monitoring systems.
Distinctive features of DUT-E:
−
delivery set includes all necessary items for the proper installation and
connection
, incl. mounting plate, connecting cable, rubber gaskets, screws and seals;
−
supply voltage range
is from 10 to 50 V;
−
possibility to reduce
the length
up to 30% without calibration*;
−
possibility to increase
the length
by using the additional sections of DUT-E;
−
thermo-correction with adjustable coefficient
allows to make automatic updating of
measurements based on the ambient temperature **;
−
easy bayonet fastening
allows you to install and remove the sensor without any tools;
−
bottom spring stop
serves to give extra stiffness for sensor mounting;
−
openings for sealing
will help to prevent the unauthorized demounting or operating
troubles of DUT-E;
−
self-diagnostic check of
DUT-E allows to control the sensor operation.**
* DUT-E A5, DUT-E A10, DUT-E F
** DUT-E 232, DUT-E 485
The manual is for the professional users who are familiar with the rules for repair and
installation works on vehicles and who have professional knowledge in the field of electrical
and electronic equipment of various transport vehicles. To ensure the proper functioning of
the DUT-E, its installation and set-up should be carried out by certified professionals trained
by the manufacturer.