Technogym Unica Evolution, Service Maintenance Manual

Page: 36 / 60

UNICA EVOLUTION: Service & Maintenance Manual - rev. 1.1
Page 10.4
10.1.6. D
ISPLAY ICONS DURING THE EXERCISE
This item selects whether to display the icons indicating the speed and range of motion during the
exercise. The display shows:
MACHINE CONFIGURATION
DISPLAY IMAGES
NO = 0 YES = 1
1
The possible choices are:
•
1 to enable the display of the icons;
•
0 to disable the display of the icons.
Select the desired value then press
OK to confirm and proceed.
10.1.7. V
ALUE OF ADDITIONAL WEIGHT
This item sets up the value of the additional weight. The display shows:
MACHINE CONFIGURATION
ADD-ON WEIGHT
KG =
2.5
Enter the value, in the unit of measure selected, of the additional weight: this is usually
2.5 kg / 5
lbs . If the additional weight is not used, enter the value 0.0 and then press OK to confirm and
proceed.
10.1.8. E
NABLING THE
TGS
KEY
This item selects whether the tests and workouts programmed from the main menu using the
keyboard should be saved on the TGS key. The display shows:
MACHINE CONFIGURATION
KEY ENABLE
NO = 0 YES = 1
1
The possible settings are:
•
1 to enable saving on the TGS key;