Technogym Unica Evolution, Service Maintenance Manual

Page: 44 / 60

UNICA EVOLUTION: Service & Maintenance Manual - rev. 1.1
Page 10.12
CONFIGURATION
ROM FIRST REP
XX PERCENT
Insert number
45 .
10.3.6. T
YPE OF ENCODER USED
This item configures the type of encoder used on the machine. The display shows:
CONFIGURATION
ENCODER TYPE
0=INFRA 1=WIRE 2=WIRE M
1
The possible settings are:
•
0 for an infrared system;
•
1 for the cable activated encoder that is currently installed;
•
2 for a different model of cable activated encoder.
Leave this setting at
1 , then press OK to confirm and proceed.
10.3.7. E
NABLE DISPLAY ADJUSTMENTS
This item selects whether to display the icon for adjusting the LCD contrast and brightness, as
described in paragraph
Errore. L'origine riferimento non è stata trovata. “ Errore. L'origine
riferimento non è stata trovata. ”, when the machine is in stand by mode. The display shows:
CONFIGURATION
ENABLE DISPLAY SETTINGS
0 = NO 1 = YES
1
The possible settings are:
•
1 to enable the display of the icon;
•
0 to disable it.
Select the desired value then press
OK to confirm and proceed.