26
Run Artis
A
B
C
Aligning the treadmill
When the equipment is running the treadmill must be centrally aligned in
relation to the frame; if the treadmill tends to move either to the right or left, or
if it is not centrally positioned, it needs aligning.
Alignment must be performed with the equipment running.
Remove cap (
A
) by pressing on one side.
Turn the adjustment screw (
B
), on the side shown in the illustration, using the
spanner supplied (
C
), until the graphics on the treadmill are aligned with the
reference marks on the rear guard, as shown in the illustration.
Warning
The treadmill realigns slowly: turn the adjustment screw ¼ or
½ a turn and then check the result before turning it again.
