31
Run Artis
Switching on and off
To turn the equipment on, switch the main switch to the
I
position.
Warning
While switching the equipment on, the treadmill may move
slightly.
After a quick system check (reset), the equipment is ready for use.
To turn the equipment off, switch the main switch to
0
position.
The equipment must be switched off only at the end of the exercise, when in
standby.
If the equipment is not expected to be used for a long time, as well as turning
it off you should also pull the plug out of the wall socket.
Warning
The main switch is used to turn the equipment on and off, but
it does not isolate it completely from the mains voltage, even
when it is set to the 0 position. For complete isolation you must
unplug the power supply plug.
