DEVELOPMENT, MANUFACTURING AND SUPPLY OF INSTRUMENTATION
33
Fig. 10.6
Fig. 10.5
DODK-117
The survey shall be performed by two operators, the one operator has the measuring
electrode, and the second one has the measuring electrode and receiver
(fig. 10.5)
. Based
on the receiver indications, you can locate the damaged cable
(by methods described in
the application 2 p.1-2).
NOTICE!
When working with the sensor DODK, the electrodes should be used without
gloves, providing the contact of the sensor with a skin (fig. 10.6)
To
call out
of the
menu
press
the
button
«Enter»
To change
of the
parameter
selected,
press the
«Enter»
button
.
Select the icon
«Mode of the
lower sensor» in
the window.
Set the
value
signal
«Filter»
To exit the
change
mode
To enter
the change
the
parameter
selected,
press the
«Enter»
button.
To exit the
setting of the
parameter, press
the «Enter»
button.
Select
the icon
«Signal»
in the
window
.
Select the
signal type
,
Receiver setting
1.Turn on the receiver
2. Set the work mode of the lower sensor to the value
«Filter»
3. Set the working frequency and type of the signal:
Summary of Contents for AP-019.1
Page 1: ......
