Principles
7
Planning basics
To ensure efficient programming, the following order must be adhered to:
Designations
All elements can be designated by selecting a predefined designation from various designation
groups or from the user defined designations.
You can also assign a number from 1 to 16 to every designation.
In the "
General settings
" menu, all user defined designations from the
technician
or
expert
level can
be created, changed or deleted globally.
Shown only in technician or expert mode
1
A prerequisite for programming and defining parameters is an accurate hydraulic scheme.
2
Using that scheme, you must define
what should be controlled and how.
3
Based on the required control functions, you must define the
sensor positions
and draw
them on the scheme.
4
In the next step, all sensors and outputs are assigned the required input and output num
-
bers.
As all the sensor inputs and outputs have different characteristics, it is not possible to sim
-
ply number them consecutively. The input and output numbers must therefore be assigned
as instructed in this manual.
5
After that, the functions are selected and their parameters are programmed.
