Data administration
67
Total reset
A
total reset
can only be carried out from the Technician or Expert level
and requires confirmation when prompted.
A
total reset
deletes the function modules, the parameter settings of all in
-
puts and outputs, bus inputs and outputs, fixed values and system values.
The settings for the CAN node number and the CAN bus rate are retained.
After tapping the screen you will be asked to confirm that you want a total
reset to be carried out.
Answer by selecting either
(= Yes) or
(= No).
If a total reset is carried out, a _Backup.dat file is created on the SD card with the old function data.
Restart
At the end of the "Data admin" menu, there is an option to restart the con
-
troller following a confirmation prompt, without disconnecting the power
from the controller.
Reset
Pressing the reset button on the front of the control
-
ler briefly (with some narrow stick) and releasing it
before the beep ends will restart the controller (= re
-
set).
Change-Log
Every change in the controller is recorded with the exact date and time in the CHANGE.LOG file on
the controller SD card and can therefore be traced.
