General settings
57
Simulation
Option of activating the simulation mode (only possible in Expert mode):
• No averaging of the outside temperature in heating circuit control.
• All temperature inputs are measured as PT1000 sensors, even if a different sensor type is
defined.
• The RAS features of room sensors are ignored.
Select from:
OFF
Analogue
– Simulation with the EWS16x2 development set
CAN Simboard
– Simulation with SIM-BOARD-USB-UVR16x2 for simulation in a system
The simulation mode is ended automatically when you exit the Expert level.
Currency
Select the currency for yield metering.
Access to menu
Definition of the user levels from which access to the main menu is permitted.
If only
technicians
or
experts
are permitted to access the menu, the relevant
password
must be en
-
tered to reach the main menu.
