DL bus
43
DL bus
This menu contains all of the information and settings needed to set up a DL bus network.
The
cable topology
of a DL bus network is described in the controller's installation instructions.
DL settings
You can use this button to activate or deactivate data output for datalog
-
ging via the DL bus and for display on the RAS-PLUS room sensor. The
C.M.I. can be used for DL datalogging. Only the input and output values
and the 2 heat meters are included in the data output; the values of the
network inputs are not included.
The DL bus acts as a bus cable for various sensors and/or for datalogging by C.M.I. or D-LOGG.
The DL bus is a bidirectional data link and is only compatible with products from Technische Al
-
ternative. The DL bus network operates independently of the CAN bus network
