Technische Alternative CAN-EZ3, General Information, Installation And Connection, Relevant Functions

Page: 89 / 96

89
Total reset
A total reset can only be carried out from the Technician or Expert level and requires confirmation
when prompted.
A
total reset deletes the function modules, the parameter settings of all inputs and outputs, bus in -
puts and outputs, fixed values and system values.
The settings for the CAN node number and the CAN bus rate are retained.
After tapping the screen you will be asked to confirm that you want a total reset to be carried out.
Answer by tapping either (= Yes) or (= No).
If a total reset is carried out, a _Backup.dat file is created on the SD card with the old function data.
Restart
At the end of the "Data admin" menu, there is an option to restart the con -
troller following a confirmation prompt, without disconnecting the con -
troller from the network.
Reset
Pressing the reset button on the front of the controller briefly (with a narrow-tip pen) and releasing it
before the beep ends will restart the controller (= reset).
Change-Log
Every change in the energy meter is recorded with the exact time in the CHANGE.LOG file on the en -
ergy meter SD card and can therefore be traced.