79
Simulation
Option of activating the simulation mode (only possible in Expert mode):
• No averaging of the outside temperature in heating circuit control.
• All temperature inputs are measured as PT1000 sensors, even if a different sensor type is
• defined.
• The RAS features of room sensors are ignored.
Select from
:
AUS
Analogue
– Simulation with the EWS16x2 development set
CAN SIM board
– Simulation with SIM-BOARD-USB-UVR16x2 for
simulation in a system
The simulation mode is ended automatically when you exit the Expert level.
Currency
Select the currency for yield metering
Access to menu
Definition of the user levels from which access to the main menu is permitted
If only technicians or experts are permitted to access the menu, the relevant password must be en
-
tered to reach the main menu.
Summary of Contents for CAN-EZ3
Page 5: ......
Page 61: ...61 Messages This menu item displays activated messages Example Message 21 is active...
Page 94: ......
Page 95: ......
