C.M.I. menu Settings
31
If the settings for the source and/or the data record of a source are changed, then we rec-
ommend
restarting
the C.M.I. (menu “
Ethernet/Restart“
) and deleting the memory. After
the first logging time, a
set-up
is carried out in
Winsol
and completed with “
Ok
“ so that the
C.M.I. logs data with the modified settings.
The contents of the internal C.M.I. memory are saved to the SD card as a day log file every
day at midnight. During the readout with
Winsol
, a day log file is created for the current day
and all day log files saved to the SD card are copied into the monthly file of
Winsol
. Depend-
ing on the setting in
Winsol
, the daily log files are either deleted or saved on the SD card.
With simultaneous data logging with C.M.I. and BL-Net or D-LOGG, this is not possible
and will disrupt logging.
Time settings
Source of supply:
The C.M.I. accepts the time-stamp either from an adjustable NTP server
(default setting: 3.at.pool.ntp.org) or from the CAN network (UVR1611 with node number 1)
or via one of the two data lines (DL bus) of the respective connected controllers.
Automatic switch to summer time takes place according to the specifications of the European
Union.
The system time is responsible for the time-stamp during data logging and for the time infor-
mation of other log files.
Because the system time of all other devices will be accepted by node 1 in a CAN network,
the C.M.I. could be assigned with node number 1. But it must be ensured that no other de-
vice has this node number. That applies especially to networks with several UVR1611.
During the data logging of controllers without individual system time (e.g. UVR64, HZR65), it
must be ensured that “
WEB
” is set as source and that there is an Internet connection.
