Online diagram
51
“Step-by-step” instructions
1.
Preparation
: Create the graphics that are intended for the online schematic (*.gif, *.jpg,
*.bmp or *.png format) and provide the function data (*.dat file) for CAN bus devices.
2.
Start the program
TA-Designer
3.
If necessary: Change language and restart program
4.
Select the menu "
File/New project..
."
Alternatively
: Click the icon in the toolbar.
5.
Select the project directory and
enter the project name.
Example:
6.
Optional
(recommended for CAN bus devices): Selection of the
function data (*dat - files). The *.dat files of the UVR1611 control-
ler, the CAN-I/O module, CAN-BC and CAN-EZ can be loaded.
One copy of the selected *.dat file is copied from the
TA-
Designer
to a new folder
Project name/
TA-Designer.
Alternatively
: Click the icon in the toolbar
Warning: If functions are subsequently added to the controller
or deleted resulting in a change to the function sequence, the
project must be edited. Delete the original *.dat file, load the
changed *.dat file, delete the values from the old
functions, insert the values from the new functions.
