Technische Alternative C.M.I. Manual Download Page 14

Page: 14 / 68

Web portal

Request remote maintenance

With  this  request  with  specification
of the  C.M.I. serial number and the
access level, the user of this C.M.I.
is  asked  for  permission  to  perform
remote maintenance for his system.

The queried user will immediately get a mail with a

link

to click.

After clicking on the link, the addition

(1)

with “

Manage

“ becomes visible for the individu-

al C.M.I. in the menu “

C.M.I.s

”.

Other C.M.I.s

Here the C.M.I.s of

other users

are displayed for which the logged in user has been giv-

en permission for remote maintenance.

Example

If “

Info

“ is clicked, the window “

C.M.I. Info

“ (see item 3. “

Manage

“) is displayed.

Access authorisation can be revoked again in this menu.
Clicking on the serial number takes you to the C.M.I. menu (see chapter “

C.M.I. menu

“).

Summary of Contents for C.M.I.





































































Search results

Summary of Contents for C.M.I.

Reviews:

Related manuals for C.M.I.

Brands by name

Popular brands

Technische Alternative C.M.I., Manual

Search results

Summary of Contents for C.M.I.

Reviews:

Related manuals for C.M.I.

Brands by name

Popular brands